The WildCharger™ pad is flat and thin with a conductive surface. Once a cell phone or other electronic device that is enabled with WildCharge technology is placed on the pad – anywhere on the pad and at any orientation – it will instantaneously receive power from the pad. It is that simple. And charging speed is the same as if the device is plugged to the wall!

Enabling a portable electronic device with WildCharge technology is also simple. A WildCharge adapter attaches to – or outright replaces – the device’s back cover. This adapter has tiny external “bumps” (contact-points) that come in physical contact with the pad.

Once a compatible electronic device is placed on the WildCharger pad, power is transferred from the pad’s surface through the contact-points to the WildCharge adapter and into the device. The geometries of the charging surface and the contact-points guarantee that regardless of where the device is placed on the pad’s surface, a closed electrical circuit is formed between the surface and the device. Such direct contact allows for a very efficient and safe power transfer without generating harmful radiation or magnetic fields.

In the case of a RAZR phone, for example, the phone’s battery-cover is replaced with one that already has the WildCharge technology built in. Once replaced, the connector at the end of the adapter’s “charging arm” is inserted into the phone’s power plug. Nothing else is required.

Such simple enablement is part of our "no-screwdriver" philosophy – enabling a device must be simple and straightforward.  In the future, we expect our technology to be integrated inside cell phones and other devices at the time of manufacture. At such time, users will not be required to make any adaptation to their electronic devices.